Cisco SPA8800 Informations techniques télécharger pdf (Page 24)

Telephony

Devices

Cisco Unified Communications UC320W Administration Guide 24

up to 30 phones on this page. However, the Cisco UC320W supports

only 24 users (not counting the built-in FXS port on the Cisco UC320W).

Adding and Removing Cisco SPA8800 IP Telephony

Gateways

You can manually add a Cisco SPA8800 IP telephony gateway that you intend to

connect later.

• Create a SPA8800: Click this button to enter information for a Cisco

SPA8800 that is not yet connected.

• Description: Enter a short description to identify this device on the pages

of the configuration utility.

• MAC Address: Enter the MAC address in the following format:

xxxx.xxxx.xxxx

, where x is a number or letter in the MAC address. The MAC

address can be found on the hardware label on the bottom panel of the

device.

• To remove a manually added gateway or missing/unregistered gateway

from the list: Click the delete button (X) for the gateway that you want to

remove. When the confirmation message appears, click OK to delete the

device, or click Cancel to keep the device.

Adding and Removing IP Phones and Side Cars

You can manually add an IP phone that you intend to connect later. You also can

indicate the number of connected side cars for each phone that you add.

Alternatively, you can add phones by importing a list.

• Create a phone: Click this button to enter information for an IP phone that is

not yet connected.

• MAC Address: Enter the MAC address of the phone in the following format:

xxxx.xxxx.xxxx

, where x is a number or letter in the MAC address. The MAC

address can be found on the hardware label on the bottom panel of the

phone.

• Model: Choose the phone model.

• Side Cars: Choose the number of side cars that are attached to this phone.

• To download a CSV file as a template for data entry or as a phone list:

Click the Download icon to save a CSV file to use as a template. If you have

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 123 124

Pas de commentaire

Cisco SPA8800 Informations techniques Page 24