Cisco 15310-MA Guide de dépannage télécharger pdf (Page 169)

2-39

Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide, Release 9.0

78-18394-01

Chapter 2 Alarm Troubleshooting

Alarm Procedures

f. If one of the circuit sizes is incorrect, complete the “Delete a Circuit” procedure on page 2-164 and

reconfigure the circuit with the correct circuit size. Refer to the “Create Circuits” chapter in the

Cisco ONS 15310-CL and Cisco ONS 15310-MA Procedure Guide for detailed procedures to do

this.

Step 13 If a valid Ethernet signal is present, complete the “Remove and Reinsert (Reseat) a Card” procedure on

page 2-163.

Step 14 If the alarm does not clear, complete the “Physically Replace a Card” procedure on page 2-163 for the

Ethernet card.

Note When you replace a card with the identical type of card, you do not need to make any changes

to the database.

Step 15 If the alarm does not clear, log into the Technical Support Website at http://www.cisco.com/techsupport

for more information or call Cisco TAC (1-800-553-2447) in order to report a Service-Affecting (SA)

problem.

2.7.38 CARLOSS (EQPT)

Default Severity: Major (MJ), Service-Affecting (SA)

SONET Logical Object: EQPT

A Carrier Loss on the LAN Equipment alarm generally occurs on OC-3 and OC-12 ports when the

ONS 15310-CL or ONS 15310-MA and the workstation hosting CTC do not have a TCP/IP connection.

The problem involves the LAN or data circuit used by the LAN (RJ-45) connector on the system. The

CARLOSS alarm does not involve an Ethernet circuit connected to an Ethernet port. The problem is in

the connection and not CTC or the node.

Warning

Invisible laser radiation could be emitted from the end of the unterminated fiber cable or connector.

Do not stare into the beam directly with optical instruments. Viewing the laser output with certain

optical instruments (for example, eye loupes, magnifiers, and microscopes) within a distance of

100 mm could pose an eye hazard.

Statement 1056

Warning

Use of controls, adjustments, or performing procedures other than those specified could result in

hazardous radiation exposure.

Statement 1057

Clear the CARLOSS (EQPT) Alarm

Step 1 If the reporting entity is a pluggable port module (PPM) port, confirm that the PPM is correctly

configured by completing the following steps:

a. Double-click the controller card (15310-CL-CTX or CTX2500 card).

b. Click the Provisioning > Pluggable Port Modules tabs.

c. View the Pluggable Port Modules area port listing in the Actual Eqpt Type column and compare

this with the contents of the Selected PPM area Rate column for the port.

1 2 ... 164 165 166 167 168 169 170 171 172 173 174 ... 379 380

Commentaires sur ces manuels

Pas de commentaire

Cisco 15310-MA Guide de dépannage Page 169

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau Cisco 15310-MA