Cisco GoQAM Informations techniques télécharger pdf (Page 89)

modid

4025561 Rev

modid

Syntax

modid modIdValue

Description

The modid command is used to specify a chassis and slot location using a single

modidValue parameter.

Parameters

The modidValue parameter can take any of these forms:

 A 4-digit number signifying a single chassis and slot location, such as 0512 for

chassis 5, slot 12.

 Bracketed numbers separated by a / symbol, representing a range of chassis and

slot locations, such as [1-5]/[4-13] for chassis 1 through 5, slots 4 through 13.

 A wildcard character (*), indicating all chassis and slot locations within the

ICIM2 domain.

Access Rights Required

Read, ReadWrite, or Admin

Example

The following sample dialog illustrates each of the modid entry formats described

above.

[10-34]/01 MODULE> modid [1-5]/[4-13] (selects chassis 1-5, slots 4-13)

[01-05]/[04-13] MODULE> modid 0512 (selects chassis 5, slot 12)

05/12 MODULE> modid * (selects all chassis and slots)

*/* MODULE>

Notes on Usage

 The modid command can be somewhat faster to enter than separate chassis and

slot commands. However, the resulting dialog may be less readable than when

using the chassis and slot commands, either separately or together on one

command line.

 Modspecs stay in effect when exiting and re-entering Module command mode.

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 307 308

Pas de commentaire

Cisco GoQAM Informations techniques Page 89