Cisco WUMC710 Manuel d'utilisateur Page 82

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 289
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 81
13
Advanced Configuration
Linksys WUMC710
Administration > Upgrade Firmware
Use this screen to upgrade the media connectors firmware. Do not upgrade
the firmware unless you are experiencing problems with the media connector
or the new firmware has a feature you want to use.
Before upgrading the firmware, download the media connectors firmware
upgrade file from the Linksys website, www.Linksys.com/support.
Upgrade Firmware
Please select a file to upgrade the firmware Click Browse and select the
firmware upgrade file. Then c
lick Start to Upgrade and follow the on-screen
instructions.
Status > Device
The media connector’s current status information is displayed.
Device Information
Firmware Version The media connectors current firmware is displayed.
Local Network
Local MAC Address The media connector’s MAC Address, as seen on your
local Ethernet network, is displayed.
Device IP Address The media connectors IP Address, as seen on your local
Ethernet network, is displayed.
Subnet Mask The Subnet Mask configured for your local network is displayed.
Status > Wireless Network
Information about your wireless network is displayed.
Wireless
Link Status The status of the connection to your wireless network is displayed.
MAC Address The media connectors MAC Address, as seen on your local
wireless network, is displayed.
Network Name (SSID) The wireless network name or SSID is displayed.
Channel Width The channel width, in MHz, used by your wireless network is
displayed.
Channel The channel setting is displayed.
Security The security method of your wireless network is displayed.
Vue de la page 81
1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 288 289

Commentaires sur ces manuels

Pas de commentaire