Cisco WUMC710 Manuel d'utilisateur télécharger pdf (Page 77)

Advanced Configuration

Linksys WUMC710

Basic Wireless Settings

Network Name (SSID) The SSID is the network name shared among all

points in a wireless network. The SSID must be identical for all devices in the

wireless network. It is case-sensitive and must not exceed 32 characters (use

any characters on the keyboard). Make sure this setting matches the setting on

your wireless router or access point.

Wireless Security

The media connector supports the following wireless security options: WPA

Personal, WPA2 Personal, and WEP. WPA (Wi-Fi Protected Access) and WPA2

are stronger security methods than WEP (Wired Equivalent Privacy). For more

information about wireless security, refer to “Wireless Security Checklist” on

page 4.

Security Mode

Select the security method for your wireless network. If you do not want to use

wireless security, keep the default, Disabled.

NOTE

Remember that each device in your wireless network MUST use

the same security method and passphrase/key, or else the wireless

devices will not be able to communicate with each other.

WPA Personal

WPA is a security standard stronger than WEP encryption.

Passphrase Enter the key shared by the media connector and your wireless

router or access point. It must have 8-63 characters.

Click Save Settings to apply your changes, or click Cancel Changes to cancel

your changes.

WPA2 Personal

WPA2 is a more advanced, more secure version of WPA.

Passphrase Enter the key shared by the media connector and wireless router

or access point. It must have 8-63 characters.

Click Save Settings to apply your changes, or click Cancel Changes to cancel

your changes.

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 288 289

Pas de commentaire

Cisco WUMC710 Manuel d'utilisateur Page 77