Cisco InfiniBand 4x Guide de l'utilisateur télécharger pdf (Page 84)

70 Implementing Cisco InfiniBand on IBM BladeCenter

9. Click Configure to designate a name for the initiator (Figure 4-54). This name will be used

later when mapping to a storage target.

Figure 4-54 Assign name to SRP Initiator

10.After you designate a name, click Submit. The initiator moves from Discovered Hosts to

Configured Initiators (Figure 4-55).

Figure 4-55 Configures SRP Initiator

11.Each Fibre Channel port on the bridge module has a port WWN. On the storage device,

the bridge port WWN needs to be mapped to the logical drives. A Fibre Channel

connection has to be established between the bridge port and the storage device for the

storage device to see the bridge port WWN.

Figure 4-56 Bridge Port Link Information

Figure 4-57 Bridge Port WWN in IBM System Storage™ DS4300

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 173 174

Pas de commentaire

Cisco InfiniBand 4x Guide de l'utilisateur Page 84