Cisco InfiniBand 4x Guide de l'utilisateur télécharger pdf (Page 139)

Chapter 7. Configuring the Cisco 3012 InfiniBand to Ethernet gateway 125

4. Commit the new Bridge Group information and review (step 4 on page 129).

5. Save the 3012 config to NVRAM (step 5 on page 130).

6. Configure the upstream 4948 to match the Ethernet Gateway configuration (step 6 on

page 130).

7. Test the configurations by pinging from the InfiniBand client to the default gateway on the

4948 (step 7 on page 131).

7.3.4 Detailed steps to implement a simple bridge group design

To implement a simple bridge group design, follow these detailed steps:

1. To create our first bridge group, from the Element Manager GUI, click Ethernet →

Bridging (see Figure 7-5).

Figure 7-5 First step in creating a bridge group through the Element Manager GUI

Tip: The default user ID and password for the 3012 is super/super.

1 2 ... 134 135 136 137 138 139 140 141 142 143 144 ... 173 174

Pas de commentaire

Cisco InfiniBand 4x Guide de l'utilisateur Page 139