Cisco InfiniBand 4x Guide de l'utilisateur télécharger pdf (Page 165)

Chapter 7. Configuring the Cisco 3012 InfiniBand to Ethernet gateway 151

5. After BG1 and BG 2 have been created, close the Bridging window and from the main

window of the Element Manager, click Ethernet → Redundancy. This opens a window

similar to Figure 7-26.

Figure 7-26 Redundancy Groups window before a Redundancy groups has been created

6. Click Add in the Redundancy Groups window to begin creating the Redundancy Group.

This will open the Add Redundancy Group window, Figure 7-27. Select the ID (default is

1). Give the group a name (RG1 in this example). Click Add Members, and select the two

bridge groups that had previously been created for this example. The end result should

like Figure 7-27.

Figure 7-27 Redundancy Group filled out, ready to be created

1 2 ... 160 161 162 163 164 165 166 167 168 169 170 ... 173 174

Pas de commentaire

Cisco InfiniBand 4x Guide de l'utilisateur Page 165