Cisco DMP100 Guide de l'utilisateur télécharger pdf (Page 17)

2. Field calibration

2.3 Conﬁguration

What is Conﬁguration

In tab “conﬁguration”, conﬁgure the connect mode and LED type to establish connection with LED screen

How to conﬁgure D-320/DMP-100 based digitizer

1. Select “RS232” when connecting with DB-320 or DMP-100

2. Press “open” button to set the communication parameters

3. Select COM port and baudrate from the dropdown list, and press “OK”

(1)

(3)

(2)

Image 2-6

conﬁgure D-320/DMP-100

The data bits, parity and stop bits are ﬁxed with default value

How to conﬁgure DX-700 based digitizer

1. Select “ETHERNET” when connecting with DX-700

2. Press ”open” button to conﬁgure the Ethernet parameter

3. IP address is the same with DX-700, select the bank and output parameter, and press “OK”

R59770395 FIELD CALIBRATION SOFTWARE (FCS-100) 08/05/09

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 37 38

Pas de commentaire

Cisco DMP100 Guide de l'utilisateur Page 17