Cisco Cisco Access Registrar 4.2 Spécifications télécharger pdf (Page 268)

100

101

6-4

Cisco Wireless LAN Controller Configuration Guide

OL-13826-01

Chapter 6 Configuring WLANsWireless Device Access

Configuring WLANs

Figure 6-2 WLANs > New Page

Step 3

From the Type drop-down box, choose WLAN to create a WLAN.

Note If you want to create a guest LAN for wired guest users, choose Guest LAN and follow the

instructions in the “Configuring Wired Guest Access” section on page 9-23.

Step 4 In the Profile Name field, enter up to 32 alphanumeric characters for the profile name to be assigned to

this WLAN. The profile name must be unique.

Step 5 In the WLAN SSID field, enter up to 32 alphanumeric characters for the SSID to be assigned to this

WLAN.

Step 6 Click Apply to commit your changes. The WLANs > Edit page appears (see Figure 6-3).

Note You can also access the WLANs > Edit page from the WLANs page by clicking the name of the

WLAN that you want to edit.

Figure 6-3 WLANs > Edit Page

Step 7

Use the parameters on the General, Security, QoS, and Advanced tabs to configure this WLAN. Refer to

the sections in the rest of this chapter for instructions on configuring specific features for WLANs.

Step 8 On the General tab, check the Status check box to enable this WLAN. Be sure to leave it unchecked until

you have finished making configuration changes to the WLAN.

1 2 ... 263 264 265 266 267 268 269 270 271 272 273 ... 635 636

Commentaires sur ces manuels

Pas de commentaire

Cisco Cisco Access Registrar 4.2 Spécifications Page 268

Commentaires sur ces manuels