Cisco Router IOS XR Manuel d'utilisateur télécharger pdf (Page 51)

Cisco IOS XR Training Page 51

Then make sure we are getting a route

RP/0/7/CPU0:R1#sh route ipv4 ospf

Sat Mar 31 18:37:15.279 UTC

O 2.2.2.2/32 [110/2] via 150.1.12.2, 00:00:06, GigabitEthernet0/3/0/2

RP/0/7/CPU0:R1#

And finallying PINGing R2 loopback from ours

RP/0/7/CPU0:R1#ping 2.2.2.2 so l0

Sat Mar 31 18:37:19.151 UTC

Type escape sequence to abort.

Sending 5, 100-byte ICMP Echos to 2.2.2.2, timeout is 2 seconds:

!!!!!

Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/5 ms

RP/0/7/CPU0:R1#

Cost

Just like normal IOS, we can change the OSPF cost on an interface – but same

thing here; it is done under the OSPF process

RP/0/7/CPU0:R1#

RP/0/7/CPU0:R1#conf t

Sun Apr 1 18:35:17.061 UTC

RP/0/7/CPU0:R1(config)#router ospf LAB

RP/0/7/CPU0:R1(config-ospf)#area 0.0.0.0

RP/0/7/CPU0:R1(config-ospf-ar)#int loop0

RP/0/7/CPU0:R1(config-ospf-ar-if)#cost ?

<1-65535> Cost

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 104 105

Pas de commentaire

Cisco Router IOS XR Manuel d'utilisateur Page 51