Cisco Router IOS XR Manuel d'utilisateur télécharger pdf (Page 20)

Cisco IOS XR Training Page 20

interface GigabitEthernet0/0/0/11

bundle id 200 mode active

no shutdown

interface GigabitEthernet0/1/0/11

bundle id 200 mode active

no shutdown

end

RP/0/RSP0/CPU0:PE1(config)#commit

Fri Apr 27 01:50:37.705 UTC

RP/0/RSP0/CPU0:PE1(config)#

Now, let’s look at our bundle interface:

RP/0/RSP0/CPU0:PE1#sh int bundle-eth 200

Fri Apr 27 01:51:04.668 UTC

Bundle-Ether200 is up, line protocol is up

Interface state transitions: 1

Hardware is Aggregated Ethernet interface(s), address is 6c9c.ed2d.0bab

Internet address is 150.1.12.1/24

MTU 1514 bytes, BW 2000000 Kbit (Max: 2000000 Kbit)

reliability 255/255, txload 0/255, rxload 0/255

Encapsulation ARPA,

Full-duplex, 2000Mb/s

loopback not set,

ARP type ARPA, ARP timeout 04:00:00

No. of members in this bundle: 2

GigabitEthernet0/0/0/11 Full-duplex 1000Mb/s Active

GigabitEthernet0/1/0/11 Full-duplex 1000Mb/s Active

Last input 00:00:18, output 00:00:18

Last clearing of "show interface" counters never

5 minute input rate 0 bits/sec, 0 packets/sec

5 minute output rate 0 bits/sec, 0 packets/sec

15 packets input, 1792 bytes, 50 total input drops

0 drops for unrecognized upper-level protocol

Received 2 broadcast packets, 13 multicast packets

0 runts, 0 giants, 0 throttles, 0 parity

0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort

12 packets output, 1408 bytes, 0 total output drops

As we can see, we are UP and have a full-duplex bandwidth of 2Gs.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 104 105

Pas de commentaire

Cisco Router IOS XR Manuel d'utilisateur Page 20