Cisco PIX 525 Spécifications télécharger pdf (Page 82)

100

101

2-22

Cisco PIX Firewall and VPN Configuration Guide

78-15033-01

Chapter 2 Establishing Connectivity

Testing and Saving Your Configuration

Clearing OSPF Configuration

This section describes how to clear OSPF configuration.

To clear the OSPF routing process ID, use the following command:

clear ospf [pid] {process | counters neighbor [neighbor-intf] [neighbor-id]}

This command only clears the process ID and does not clear any configuration. Replace pid with the

OSPF routing process ID. Replace neighbor-intf with the interface for a specific neighbor. Replace

neighbor-id with the IP address of a specific neighbor.

To clear the OSPF configuration, use one of the following commands:

no routing interface interface-name>

no router ospf id

Replace interface-name with the identifier for a specific interface. Replace id with the OSPF area

identifier.

Testing and Saving Your Configuration

This section describes how to make sure your configuration works by testing connectivity, and how to

save your configuration. It includes the following topics:

• Testing Connectivity, page 2-23

• Saving Your Configuration, page 2-25

show ospf retransmission-list

[neighbor-addr] [interface-name]

Displays a list of all link-state advertisements (LSAs) waiting

to be resent. Replace neighbor-addr with the IP address of a

neighbor. Replace interface-name with the identifier for a

specific interface.

show ospf [process-id]

summary-address

Displays a list of all summary address redistribution

information configured under an OSPF process. Replace

process-ID with a process identifier for a specific OSPF area

ID.

show ospf virtual-links

Displays parameters and the current state of OSPF virtual links.

Table 2-5 OSPF show Commands (continued)

Command Result

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 465 466

Commentaires sur ces manuels

Pas de commentaire

Cisco PIX 525 Spécifications Page 82

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Cisco PIX 525