Cisco QuickVPN - PC Informations techniques télécharger pdf (Page 56)

Configuring Networking

Configuring IPv6

Cisco RV215W Wireless-N VPN Firewall Administration Guide 56

STEP 5 Choose Networking > IPv6 > IPv6 LAN Configuration.

STEP 6 In the IPv6 Address Pools Table, click Add Row.

STEP 7 Enter this information:

STEP 8 Click Save.

To edit the settings of a pool, select the pool and click Edit. To delete a selected

pool, click Delete. Click Save to apply changes.

Configuring IPv6 Static Routing

You can configure static routes to direct packets to the destination network. A

static route is a predetermined pathway that a packet must travel to reach a

specific host or network.

Some ISPs require static routes to build a routing table instead of using dynamic

routing protocols. Static routes do not require CPU resources to exchange routing

information with a peer router.

You can also use static routes to reach peer routers that do not support dynamic

routing protocols. Static routes can be used together with dynamic routes. Be

careful not to introduce routing loops in your network.

Static DNS 1 IPv6 address of the primary DNS server on the ISP

IPv6 network.

Static DNS 2 IPv6 address of the secondary DNS server on the

ISP IPv6 network.

Client Lease Time Client lease time duration (in seconds) for which

IPv6 addresses are leased to endpoints on the

LAN.

Start Address Starting IPv6 address of the pool.

End Address Ending IPv6 address of the pool.

IPv6 Prefix Length Prefix length that determines the number of

common initial bits in the network addresses.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 145 146

Pas de commentaire

Cisco QuickVPN - PC Informations techniques Page 56