Cisco 881V Manuel d'utilisateur

© 2014 Sierra Wireless. All rights reserved.1Configuring WAN Failover with a Cisco 881 Router and an AirLink ES440When the AirLink ES440 is combined w

WAN Failover: Cisco 881 and AirLink ES44010 41162615. Click Browse...6. Navigate to the template file saved in Step 2. 7. Click Upload.8. Click Reboo

WAN Failover: Cisco 881 and AirLink ES440Rev 1 Sep.14 11Figure 3: ACEmanager: WAN/Cellular > Reliable Static Routing (RSR)Figure 4: ACEmanager: LA

WAN Failover: Cisco 881 and AirLink ES44012 4116261Figure 5: ACEmanager: LAN > Host Port RoutingUsing AVMS to Monitor the FailoverYou can use AVMS

WAN Failover: Cisco 881 and AirLink ES4402 4116261Configure the Cisco 881 Router for WAN FailoverConfigure the Cisco router’s IP SLA feature to suppor

WAN Failover: Cisco 881 and AirLink ES440Rev 1 Sep.14 36. Configure the WAN interface IP.7. Configure the NAT rules to allow access to the Internet.N

WAN Failover: Cisco 881 and AirLink ES4404 41162619. Configure failover routes.10. Save the configuration.11. Key commands to monitor the router state

WAN Failover: Cisco 881 and AirLink ES440Rev 1 Sep.14 5If the AirLink ES440 is not already configured for Reliable Static Routing, you can use either

WAN Failover: Cisco 881 and AirLink ES4406 4116261The Create template window opens.4. In the Application / Firmware window, select (or enter) ALEOS ES

WAN Failover: Cisco 881 and AirLink ES440Rev 1 Sep.14 7Host Network 2 = 192.168.1.0Host Network Subnet Mask 2 = 255.255.255.0Host Network 2 Route = E

WAN Failover: Cisco 881 and AirLink ES4408 4116261Apply the Template1. Go to your system detail page and apply the template.Note: Using an AVMS templa

WAN Failover: Cisco 881 and AirLink ES440Rev 1 Sep.14 9Configure the ES440 using ACEmanagerTo use ACEmanager to configure the ES440:1. Connect your P