Cisco QuickVPN - PC Informations techniques télécharger pdf (Page 43)

Configuring Networking

Configuring the LAN Settings

Cisco RV215W Wireless-N VPN Firewall Administration Guide 43

STEP 3 In the Setting Table, configure the following settings:

STEP 4 Click Save.

Port Management

You can configure the speed and flow control settings of the Cisco RV215W LAN

ports.

To configure port speeds and flow control:

STEP 1 Choose Networking > Port Management.

STEP 2 Configure this information:

Forward Delay The forward delay is the interval after which an

interface changes from the blocking to forwarding

state. Enter a number from 4 to 30. The default is

15.

Force Version Select the default protocol version to use. Select

Normal (use RSTP) or Compatible (compatible

with old STP). The default is Normal.

Protocol Enable Check to enable RSTP on the associated port.

RSTP is disabled by default.

Edge Check to specify that the associated port is an

edge port (end station). Uncheck to specify that the

associated port is a link (bridge) to another STP

device. Edge port is enabled by default.

Path Cost Enter the RSTP path cost for the designated ports.

Use 0 for the default value (the Cisco RV215W

automatically determines the path value). You can

also enter a number from 2 to 200000000.

Port The port number.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 145 146

Pas de commentaire

Cisco QuickVPN - PC Informations techniques Page 43