Cisco NM-16ESW - EtherSwitch Switch Manuel d'utilisateur télécharger pdf (Page 61)

Configuring the Cisco Gigabit EtherSwitch EHWIC

How to Configure Gigabit EtherSwitch EHWICs

Configuring the Cisco Gigabit EtherSwitch EHWIC

OL-23155-01

2. bridge bridge-group hello-time seconds

3. end

DETAILED STEPS

To return to the default setting, use the no bridge bridge-group hello-time global configuration

command.

Changing the Forward-Delay Interval

The forward-delay interval is the amount of time spent listening for topology change information after

an interface has been activated for switching and before forwarding actually begins.

Beginning in privileged EXEC mode, follow these steps to change the forward-delay interval.

SUMMARY STEPS

1. configure terminal

2. bridge bridge-group forward-time seconds

3. end

Command Purpose

Step 1

configure terminal

Example:

Router#configure terminal

Enters global configuration mode.

Step 2

bridge bridge-group hello-time seconds

Example:

Router(config)#bridge bridge-group

hello-time seconds

Specifies the interval between hello BPDUs.

• For bridge-group, specify the bridge group number. The range is 1

to 255.

• For seconds, enter a number from 1 to 10. The default is 2 seconds.

Step 3

end

Example:

Router(config)#end

Returns to privileged EXEC mode.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 89 90

Pas de commentaire

Cisco NM-16ESW - EtherSwitch Switch Manuel d'utilisateur Page 61