Cisco AS5300 - Universal Access Server Guide d'installation télécharger pdf (Page 7)

Connect the Ethernet Port for LAN Access

You can connect the Cisco AS5300 to a 10BASE-T or 100BASE-T Ethernet network.

You will need an Ethernet cable to connect the Cisco AS5300 to an Ethernet hub. This cable is not included.

Step 1 Connect an Ethernet cable to the 10BASE-T port or the 10/100BASE-T port, depending on whether your network is

10BASE-T or 100BASE-T.

Step 2 Connect the other end of the Ethernet cable to an Ethernet hub (not included).

Universal access

server

Ethernet hub

Straight-through

Ethernet cable

10BASE-T port

(RJ-45)

100BASE-T port

(RJ-45)

1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

Pas de commentaire

Cisco AS5300 - Universal Access Server Guide d'installation Page 7