Cisco AS5300 - Universal Access Server Guide d'installation télécharger pdf (Page 10)

Connect the Serial Port for WAN Access

Use a serial 12-in-1 cable (DTE if connecting to a DSU or DCE if connecting to a CSU) to connect one of the four synchronous

serial ports on the E1 or T1 PRI cards (with serial support) to a modem or a CSU or DSU. The CSU or DSU provides access to

a WAN.

Step 1 Connect the serial 12-in-1 cable connector on the serial cable to the serial port on the rear panel of the Cisco AS5300.

Step 2 Connect the EIA/TIA-232, EIA/TIA-449, EIA/TIA-530A, EIA-530, V.35, or X.21 connector to the CSU or DSU.

15874

Universal access

server

Serial

transition

cable

CSU/DSU or

other DCE or DTE

LALB

PORT SELECT

123 4567

ASASASAS ASASASAS

ACT OK

RX TX

Synchronous serial

port (DB-26)

EIA/TIA-232, EIA/TIA-449, EIA/TIA-530A,

EIA-530, V.35 or X.21 connector

Internet

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Pas de commentaire

Cisco AS5300 - Universal Access Server Guide d'installation Page 10