Cisco 7507 Manuel d'utilisateur télécharger pdf (Page 17)

Connect the RSP

Connect the Console Port

The system console port on the RSP is a DB-25

receptacle DCE port for connecting a data terminal,

which allows you to conﬁgure and manage the

system. The console port is labeled Console.

Step 1 Connect the console cable from the

terminal to the console port on the RSP.

Step 2 Check your terminal’s documentation to

determine the baud rate of the terminal

you will be using.

Note The baud rate of the terminal you are using

must match the default baud rate (9600 baud).

Step 3 Setup theterminal as follows: 9600 baud,

8 data bits, no parity, and 2 stop bits

(9600, 8N2).

Connect the Auxiliary Port

terminal

DB-25 female

DB-25 male

RSP

The auxiliary port on the RSP is an ETA/TIA DTE

DB-25 plug to which you can attach external

equipment in order to access the router from the

network. The port is located next to the console port

on the RSP and is labeled AUX.

Step 1 Connect the cable from the auxiliary

device to the auxiliary port on the RSP.

Step 2 Check your terminal’s documentation to

determine the baud rate of the terminal.

Note The baud rate of the terminal must match the

default baud rate (9600 baud).

Step 3 Setup theterminal as follows: 9600 baud,

8 data bits, no parity, and 2 stop bits

(9600, 8N2).

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 43 44

Pas de commentaire

Cisco 7507 Manuel d'utilisateur Page 17