Cisco 1600R Guide d'installation télécharger pdf (Page 70)

Cisco 1600 Series Router Hardware Installation Guide

ISDN Configuration Options

B-6

ISDN Conﬁguration Options

For information on how to conﬁgure Cisco 1600 series routers to dial into a central site

router over ISDN, refer to the Cisco 1600 Series Software Conﬁguration Guide that came

with your router.

For more advanced information on conﬁguring ISDN for Cisco 1600 series routers, refer to

the chapter “Conﬁguring ISDN” in the Wide-Area Networking Conﬁguration Guide

publication, which is on the Documentation CD-ROM that came with your router. This

document includes the information on the following topics:

• Deﬁning ISDN TEI Negotiation

• Conﬁguring Calling Line Identiﬁcation (CLI) Screening

• Conﬁguring Called Party Number Veriﬁcation

• Conﬁguring ISDN Calling Number Identiﬁcation

• Conﬁguring the Line Speed for Calls Not ISDN End-To-End

• Enabling PPP on VTY Lines

• Conﬁguring Encapsulation for Frame Relay or X.25 Networks

• Conﬁguring Network Addressing

• Conﬁguring Semipermanent Connections (optional, for Germany only)

• Performing Conﬁguration Self-Tests

• Monitoring and Maintaining ISDN Interfaces

Snapshot Routing over ISDN

You can also conﬁgure snapshot routing for the router ISDN interface. Snapshot routing is

a method of learning remote routes dynamically and keeping the routes available for a

speciﬁed period of time, even though routing updates are not exchanged during that period.

See the chapter “Conﬁguring DDR” in the Wide-Area Networking Conﬁguration Guide

publication for detailed information about snapshot routing.

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 87 88

Pas de commentaire

Cisco 1600R Guide d'installation Page 70