Cisco 1005 - 1005 Router Guide de l'utilisateur télécharger pdf (Page 12)

2-12 Cisco 1005 User Guide

Connecting to the Network and Powering Up the Router

Step 4 Align the bottom of the PCMCIA door with the bottom of the PCMCIA slot. (See

Figure 2-7.) Then push the top of the door toward the rear panel until the plastic

tabs snap into place. Replacing the door prevents dust from entering the chassis.

Note If you cannot close the door completely, the Flash memory card might not be seated

completely in the connector (inside the router). Press the black plastic eject button at the

right side of the slot (see Figure 2-6) to remove the Flash memory card. Then reinsert the

card and replace the door.

Figure 2-7 Replacing the PCMCIA Door

H3809

12VDC

Tabs

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

Pas de commentaire

Cisco 1005 - 1005 Router Guide de l'utilisateur Page 12