Cisco ISB7105 Guide de l'utilisateur télécharger pdf (Page 9)

Watching TDS TV

Turning on Your TV

Your set-top box, network hardware, and TV should be connected and plugged in.

The POWER button is green when your set-top box is turned on. The LINK light on your set-top box should be solid

green, indicating the set-top box is connected to the network. If the LINK light is not solid green, please check that all

wires between the set-top box and residential gateway are secure. And, make sure the Internet light on the gateway

is green. If not, try to power cycle the gateway. If these troubleshooting tips are not successful, contact a TDS TV

customer-service representative at 1-866-44 TDS TV for assistance.

Now, follow these steps:

1. Press the power button on your TV or on your TV remote control to turn your TV on.

2. Press the POWER button on your set-top box remote control to turn on the signal from the set-top box.

NOTE: The set-top box will automatically go into stand-by after 8 hours of inactivity.

Using Your TDS TV Set-Top Box Remote Control

Note: Unless otherwise speciﬁed in this document, the term remote control refers to the set-top box Universal

Remote Control provided with TDS TV, not your TV remote control or any other remote control. Use the set-top box

remote control, not the remote control that came with your TV, to control TDS TV.

Important remote control buttons and descriptions of how you use them are listed on the following pages.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 68 69

Pas de commentaire

Cisco ISB7105 Guide de l'utilisateur Page 9