
1-8
Cisco Aironet Access Point Hardware Installation Guide
OL-0738-02
Chapter 1 Overview
Access Point Specifications
Access Point Specifications
Table 1-1 lists specifications for the access point.
Table 1-1 Access Point Specifications
Category Specification
Physical
Size 6.30 in. (16 cm) W x 4.72 in. (12 cm) D x 1.45 in. (3.7 cm) H
Status indicators Three indicators on the top panel: Ethernet traffic, status, and
radio traffic
Connectors On the back panel: An RJ-45 jack for 10/100 Ethernet
connections; a nine-pin serial connector; a power connector
(plug-in AC adapter) for a regulated 5V input (340 series
only)
Voltage range 24 to 60 VDC (regulated 5 VDC for 340 series only)
Operating temperature range 32 to 122
o
F (0 to 50
o
C) for 340 and 350 series
–4 to 131
o
F (–20 to 55
o
C) for 350 series metal case
32 to 104
o
F (0 to 40
o
C) for power injectors
Weight Less than 1 lb (0.45 kg) for 340 and 350 series
1.43 lbs (0.64 kg) for 350 series metal case
Radio
Power output 100, 50, 30, 20, 5, or 1 mW for 350 series
30, 20, 5, or 1 mW for 340 series
(Depending on the regulatory domain in which the access point
is installed)
Frequency 2.400 to 2.497 GHz (Depending on the regulatory domain in
which the access point is installed)
Range Indoor:
150 ft at 11 Mbps (100 ft for 340 series only)
350 ft at 1 Mbps (300 ft for 340 series only)
Outdoor:
800 ft at 11 Mbps (400 ft for 340 series only)
2000 ft at 1 Mbps (1500 ft for 340 series only)
Modulation Direct Sequence Spread Spectrum
Data rates 1, 2, 5.5, and 11 Mbps
Commentaires sur ces manuels