Cisco AS5200 - Universal Access Server Manuel d'utilisateur télécharger pdf (Page 11)

2 Install the Universal Access Server (continued)

Connect to a Console for Local

Administrative Access

You will need an RJ-45-to-RJ-45 rollover cable and

a terminal adapter (RJ-45-to-DB-9 or

RJ-45-to-DB-25) to connect a console. These cables

and adapters are included. Take these steps:

Step 1 Connect one of the adapters, labeled

TERMINAL, tothecommunications port

(usually labeled COM) on your

PC or terminal. (This communications

port is also known as a console.)

Step 2 Connect one end of the RJ-45-to-RJ-45

rollover cable to the adapter.

Step 3 Connect the other end of the

RJ-45-to-RJ-45 rollover cable to the port

labeled CONSOLE on the rear panel of

the access server.

Step 4 Conﬁgure your PC terminal emulation

software or terminal for 9600 baud, 8

data bits, no parity, and 1 stop bit.

H10340

Universal access server

Console port (RJ-45)

(labeled CONSOLE)

RJ-45-to-RJ-45

rollover cable

(laptop)

RJ-45-to-DB-9 or

RJ-45-to-DB-25 adapter

(labeled TERMINAL)

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Pas de commentaire

Cisco AS5200 - Universal Access Server Manuel d'utilisateur Page 11