Cisco PSUS4 Guide de l'utilisateur télécharger pdf (Page 27)

Chapter 6: Configuring the PrintServer

The Printer Tab - Internet Printing

PrintServer for USB with 4-Port Switch

The Printer Tab - Logical Port

The Logical Printers tab contains the logical printer settings of the PrintServer. Select from the following fields for

each Logical Printer. (See Figure 6-6.)

Select Printer. Select the number (1-3) from the drop-down menu of Logical Printer Port No: you wish to

configure. Click the Get Data button to update the display with the current data for the selected logical printer.

Details

• Pre-string (Hex). Enter the printer control string (in hexadecimal characters) to be sent to the printer before

each print job. This string cannot exceed 30 characters.

• Post String (Hex). Enter the printer control string (in hexadecimal characters) to be sent to the printer after

each print job. This string cannot exceed 30 characters.

• Convert LF to CR+LF. If checked, LF (line feed) characters are changed to CR+LF (carriage return + line

feed).

Change these settings as described here and click the Save button to apply your changes or click Cancel to

cancel your changes.

Figure 6-6: Logical Port

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 57 58

Pas de commentaire

Cisco PSUS4 Guide de l'utilisateur Page 27