Cisco WMA11B Guide de l'utilisateur télécharger pdf (Page 16)

2524

1. Power off the Adapter, and move it to your TV. If you are using a wireless

network, make sure the Adapter’s antenna is pointing straight up in the air.

If you are using a wired network, make sure the cable connections remain

secure.

2. Do one of the following:

Connect the S-video cable to the Adapter’s S-video port and the TV’s

S-video in port.

Connect the yellow RCA connectors of the audio/video cable to the

Adapter’s Video port and the TV’s Video in port.

3. Use the color-coded audio/video cable to connect the Adapter’s Left and

Right ports to the stereo’s Audio in ports.

4. On your TV, select the input that matches the connection to the Adapter.

5. Power on the Adapter. The main menu of the Media Navigator will appear

on your TV.

Proceed to the “Placement Options” section.

Connecting to Your TV Only

2. Do one of the following:

Connect the S-video cable to the Adapter’s S-video port and the TV’s

S-video in port.

Connect the yellow RCA connectors of the audio/video cable to the

Adapter’s Video port and the TV’s Video in port.

3. Use the color-coded audio/video cable to connect the Adapter’s Left and

Right ports to the stereo’s Audio in ports.

4. On your TV, select the input that matches the connection to the Adapter.

5. On your stereo, select the input that matches the connection to the Adapter.

6. Power on the Adapter. The main menu of the Media Navigator will appear

on your TV.

Proceed to the “Placement Options” section.

Figure 7-2

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 31 32

Pas de commentaire

Cisco WMA11B Guide de l'utilisateur Page 16