Cisco WMA11B Guide de l'utilisateur télécharger pdf (Page 10)

1312

5. On the screen shown in Figure 5-4, choose whether the Adapter will be con-

nected to your wireless or wired network AFTER you have configured it.

If you will use the Adapter as part of a wireless network, then click the Ye s

button for the Wireless network choice.

If you will use the Adapter as part of a wired network, then click the Ye s

button for the Wired network choice.

Click the Next button.

Figure 5-4

3. When you see the screen shown in Figure 5-2, make sure the Adapter’s

Wireless or Ethernet LED is flashing. This indicates that the Adapter is

properly connected to either a wireless or wired network. Then click the

Next button to continue.

4. The screen shown in Figure 5-3 displays a list of Wireless-B Media

Adapters on your network, along with the settings information for each

Adapter. (If you have only one Adapter on your network, it will be the only

one displayed.) Select the Adapter you are currently installing by clicking

its name in the Adapters Found box. Then click the Next button.

Figure 5-2

Figure 5-3

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 31 32

Pas de commentaire

Cisco WMA11B Guide de l'utilisateur Page 10