Cisco SOHO 91 Guide d'installation télécharger pdf (Page 11)

1-11

Cisco 831 and SOHO 91 Router Cabling and Setup Quick Start Guide

78-14783-05

Chapter 1 Cisco 831 Router and Cisco SOHO 91 Router Cabling and Setup Quick Start Guide

Check the PC Configuration (CRWS Users)

Only follow the instructions in this section if CRWS is installed on the router. If SDM is installed, refer

to the “If SDM is Installed On the Router” section on page 1-14.

Each PC that is connected to the router must be configured to use TCP/IP and to use DHCP automatically

to obtain its IP address. Follow these steps to configure each PC that is running Microsoft Windows NT

or Microsoft Windows 95, 98, or 2000. If the PC is running a different version of Microsoft Windows,

refer to the documentation that came with the PC.

Step 1 Start the PC, and open the Control Panel.

Step 2 Click the Network icon to display the Network window.

Step 3 Verify that TCP/IP has been added and associated with the Ethernet adapter. TCP/IP is shown as a cable

icon in the Configuration window on Microsoft Windows 95, 98, and 2000, and as a cable icon in the

Protocol window on Microsoft Windows NT. If the icon is not visible, click Add, and add Microsoft

TCP/IP.

Step 4 To verify that the PC is configured to obtain an IP address automatically, click the TCP/IP cable icon,

and select the IP address tab in the TCP/IP Properties window. If it is unchecked, check Obtain an IP

address from a DHCP server. The IP address and Subnet mask fields should be grayed out.

Step 5 To accept all changes and exit this window, click OK. Then click OK in the Network window.

Step 6 If you are prompted, click Yes to reboot the PC.

For more information on how to configure TCP/IP, refer to the Cisco Router Web Setup Troubleshooting

Guide, which is available on the Cisco 800 and SOHO Series Product Documentation CD.

Connect to a Website (CRWS Users)

Log on to a PC that is connected to the router, open a web browser, and connect to a website. If you

cannot access a website, you must follow the steps in the “If You Cannot Connect to a Website” section.

If you successfully accessed a website, you do not need to change the configuration.

Congratulations! You’ve Completed the Setup!

If you were able to connect to a website, you have completed the cabling and setup of your router, and

you can continue to use it to access the Internet.

If you need to configure more features, click the CRWS link for the feature you need to configure, and

enter configuration values for the router.

The remaining sections of this Quick Start Guide provide information about related documentation and

about the Cisco 800 and SOHO Series Product Documentation CD.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 17 18

Pas de commentaire

Cisco SOHO 91 Guide d'installation Page 11