Cisco SCE 2000 4xGBE Spécifications télécharger pdf (Page 197)

Cisco SCE 2000 and SCE 1000 CLI Command Reference

Chapter 2 CLI Command Reference

ip-tunnel IPinIP DSCP-marking-skip

Examples The following example shows how to configure the SCE platform to perform DSCP marking on the

internal IP header of an IPinIP flows.

Note that you must access the root level to shutdown the linecard, even though the DSCP marking

command is at the admin level.

SCE>enable 15

Password:<cisco>

SCE#> configure

SCE(config)#>interface linecard 0

SCE(config if)#>shutdown

SCE(config if)#>ip-tunnel IPinIP DSCP-marking-skip

SCE(config if)#>no shutdown

Pas de commentaire

Cisco SCE 2000 4xGBE Spécifications Page 197