Cisco SCE 2000 4xGBE Spécifications télécharger pdf (Page 183)

100

101

2-147

Cisco SCE 2000 and SCE 1000 CLI Command Reference

OL-26797-03

Chapter 2 CLI Command Reference

ip route

Adds an IP routing entry to the routing table. Use the no option to remove an IP routing entry from the

routing table.

ip route ip-address mask [next-hop]

no ip route prefix mask [next-hop]

no ip route all

Syntax Description

Command Default This command has no default settings.

Command Modes Global configuration

Command History This table includes the following release-specific history entries:

Usage Guidelines All addresses must be in dotted notation.

The next-hop must be within the Management FastEthernet Interface subnet.

A maximum of 100 subnets can be configured.

Use the all keyword with the no form of the command to remove all IP routing entries from the routing

table.

Authorization: admin

Examples The following examples illustrate the use of this command:

EXAMPLE 1:

The following example sets the next-hop to 20.2.2.2 for IP addresses in the range 10.10.10.0 to

10.10.10.255.

SCE>enable 10

Password:<cisco>

SCE#config

SCE(config)#ip route 10.10.10.0 255.255.255.0 20.2.2.2



SCE(config)#

ip-address The IP address of the new entry.

mask The relevant subnet mask.

next-hop The next hop in the route.

Release Modification

2.5.7 This command was introduced.

1 2 ... 178 179 180 181 182 183 184 185 186 187 188 ... 603 604

Commentaires sur ces manuels

Pas de commentaire

Cisco SCE 2000 4xGBE Spécifications Page 183

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau Cisco SCE 2000 4xGBE