Cisco ISE - Line Card ISE Manuel d'utilisateur télécharger pdf (Page 14)

Cisco IOS SoftwareConfiguration for theCisco 12000 SeriesOne-Port Channelized OC-12/STM-4(DS1/E1) ISE Line

How to Configure Layer 1 Features

Cisco IOS Release 12.0(27)S1

Configuring T1 Lines Under SONET Framing

With SONET framing, you can configure T1s in vt-15 or in ct3 mode.

Procedures and examples for configuring T1 channel-groups on the 1-Port CHOC-12 ISE line card are

presented in the following sections:

• Configuring a T1 in SONET Virtural Tributary Mode, page 15

• Configuring a T1 in SONET CT3 Mode, page 16

• Removing a Logical Channel Group from a T1 Line, page 18

• Using the ping Command to Verify Network Connectivity, page 18

• Using T1 Interface Loopback Modes, page 28

• Configuring a BER Test on a T1 Line, page 21

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 57 58

Pas de commentaire

Cisco ISE - Line Card ISE Manuel d'utilisateur Page 14