Cisco IPS 7.1 Guide d'installation Page 150

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 422
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 149
5-22
Cisco Intrusion Prevention System Appliance Hardware Installation Guide for IPS 7.1
OL-24002-01
Chapter 5 Installing the IPS 4510 and IPS 4520
Installing and Removing the Slide Rail Kit
Package Contents
The slide rail kit package contains the following items:
Left and right slide rails
Six #10-32 screws
Two #10-32 cage nuts
Installing the Chassis in the Rack
To install the chassis in the rack using the slide rail kit, follow these steps:
Step 1 Press the latch on the end of the slide rail and push forward to engage the pins in the rack until the clip
clicks and locks around the rack post (Figure 5-8).
Note The slide rails are labeled ‘left’ and ‘right.’ Install the left slide rail on the left side of the rack
and the right slide rail on the right side of the rack.
Figure 5-8 Press and Push to Install the Slide Rail
330560
Vue de la page 149
1 2 ... 145 146 147 148 149 150 151 152 153 154 155 ... 421 422

Commentaires sur ces manuels

Pas de commentaire