Cisco H.323/SIP Informations techniques télécharger pdf (Page 46)

Polycom® Unified Communications Deployment Guide for Cisco Environments

c The Send Content to Legacy Endpoints configuration checkbox is disabled if the TIP

Compatibility Mode was set to Video and Content, Verify the ability to change this

setting is disabled.

7 Assign this Conference Profile to an appropriate Meeting Room that will be used for TIP

telepresence conferences with Cisco CTS endpoints.

Task 4: Enabling a Meeting Room for TIP Conferences

Meeting Rooms that are intended for immersive telepresence calls involving TIP, must be

configured with a TIP enabled Conference Profile.

To enable meeting rooms:

1 Under the RMX Management menu, select Meeting Rooms and create a new Meeting

Room or revise an existing one.

2 Under the General tab, ensure that the Profile dropdown associates a Conference Profile

that has been TIP enabled as in Task 3.

See “Creating a New Meeting Room” in the RMX Administrator’s Guide.

Note: No TIP Support on RMX Entry Queues

RMX Entry Queues currently do not support TIP, therefore Meeting Rooms must be

defined for dialing. Alternatively, RMX adhoc or scheduled dial-out can be used.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 94 95

Pas de commentaire

Cisco H.323/SIP Informations techniques Page 46