Cisco AS5300 - Universal Access Server Spécifications télécharger pdf (Page 38)

Configuration Tasks

Cisco IOS Release 12.0(3)T

Conﬁgure Voice over IP to Support Microsoft NetMeeting

To conﬁgure Voice over IP to support NetMeeting, create a VoIP peer that contains the following

information:

• Session Target—IP address or DNS name of the PC running NetMeeting

• CODEC—G711 U Law or G711 A Law

Conﬁgure Microsoft NetMeeting for Voice Over IP

To conﬁgure NetMeeting to work with Voice over IP, perform the following steps in the order given:

1 From the Tools menu in the NetMeeting application, select Options. NetMeeting will display the

Options dialog box.

2 Click the Audio tab.

3 Click the Calling a telephone using NetMeeting check box.

4 Enter the IP address of the Cisco AS5300 in the IP address ﬁeld.

5 Under General, click Advanced.

6 Click the Manually conﬁgured compression settings check box.

7 Select the CODEC value CCITT ulaw 8000Hz.

8 Click the Up button until this CODEC value is at the top of the list.

9 Click OK to exit.

Initiate a Call Using Microsoft NetMeeting

To initiate a call using Microsoft NetMeeting, perform the following steps in the order given:

1 Click the Call icon from the NetMeeting application. Microsoft NetMeeting will open the call

dialog box.

2 From the Call dialog box, select call using H.323 gateway.

3 Enter the telephone number in the Address ﬁeld.

4 Click Call to initiate a call to the Cisco AS5300 from Microsoft NetMeeting.

VFC Management

VFCs come with a single bundled image of VCWare stored in VFC Flash memory. Table 3 shows

the extension types deﬁned for these embedded ﬁrmware ﬁles.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 49 50

Pas de commentaire

Cisco AS5300 - Universal Access Server Spécifications Page 38