Cisco AS2509-RJ Manuel d'utilisateur télécharger pdf (Page 16)

16 Sun Technical Compute Farm Read Me First • December 2000

FIGURE 8 Removing and Replacing the Terminal Server Mounting Brackets

▼ To Replace a Terminal Server

1. Set the replacement terminal server on a workbench.

2. Using a No. 2 Phillips screwdriver, replace the two screws securing each front and

back mounting bracket to the terminal server (

FIGURE 8).

3. From the front of the rack (

FIGURE 7):

a. Position the terminal server into the rack, making sure that the mounting plate

back mounting screws are properly positioned into the terminal server back

mounting brackets.

b. Align the terminal server front mounting brackets with the mounting plate

front mounting screw holes.

Refer to

FIGURE 9 for proper screw hole position.

c. Using a No. 2 Phillips screwdriver, tighten the front mounting screws securing

the terminal server chassis to the mounting plate.

4. From the back of the rack (

FIGURE 7):

a. Using a No. 2 Phillips screwdriver, tighten the rear mounting screws securing

the terminal server back mounting brackets to the mounting plate.

Cisco 2600

Screw (4)

Back mounting

bracket (2)

(No. 6)

Front mounting

bracket (2)

Screw (4)

(No. 6)

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 25 26

Pas de commentaire

Cisco AS2509-RJ Manuel d'utilisateur Page 16