Cisco PIX-515E Guide d'installation télécharger pdf (Page 5)

4-5

Cisco PIX Firewall Hardware Installation Guide

78-13880-01

Chapter 4 PIX 515/515E

Installing a PIX 515/515E

PIX 515/515E Vertical Mounting

To mount the PIX 515/515E vertically, attach the brackets to the side of the unit and mount the unit

vertically as shown in Figure 4-6.

Figure 4-6 Installing the PIX 515/515E Vertically

PIX 515/515E Installation

Complete these steps to install a PIX 515/515E:

Step 1 Connect the cable as shown in Figure 4-7 so that you have either a DB-9 or DB-25 connector on one

end as required by the serial port for your computer, and the other end is the RJ-45 connector.

Note Use the Console port to connect to a computer to enter configuration commands.

Locate the serial cable from the accessory kit. The serial cable assembly consists

of a null modem cable with RJ-45 connectors, and one DB-9 connector and a

DB-25 connector.

Step 2 Connect the RJ-45 connector to the PIX 515/515E Console port and connect the other end to the serial

port connector on your computer.

24303

DO NOT INSTALL INTERFACE

CARDS WITH POWER APPLIED

CONSOLE10/100 ETHERNET 0/0

Link

FDX

100 Mbps

Link

100 Mbps

FAILOVER

10/100 ETHERNET 0/0

PIX-515

1 2 3 4 5 6 7 8 9 10 ... 19 20

Pas de commentaire

Cisco PIX-515E Guide d'installation Page 5