Cisco 1605R Guide d'installation télécharger pdf (Page 80)

Voice Interface Cards

Cisco WAN Interface Cards Hardware Installation Guide

3-32

Connecting the 2-Port ISDN BRI Card

Step 1 Conﬁrm that the router is still turned OFF.

Step 2 Connect one end of a straight-through RJ-45-to-RJ-45 cable to the card’s RJ-45

port. (See Figure 3-30.)

Step 3 Connect the other end to the RJ-45 wall outlet.

Caution To prevent damage to the router, be sure to connect the BRI cable to the

BRI connector only, and not to any other RJ-45 connector.

1 Analog voice interface card 0 Down

1Down

0 Analog voice interface card 0 Up

1Up

1 VIC-2BRI-S/T-TE 0 Up

1Down

Table 3-6 Voice Interface Card Conﬁgurations (continued)

Network

Module Slot Voice Interface Card Port Status

1 2 ... 75 76 77 78 79 80 81 82

Pas de commentaire

Cisco 1605R Guide d'installation Page 80