Cisco 1605R Guide d'installation télécharger pdf (Page 45)

Installing WAN and Voice Interface Cards in a Cisco Modular Router 2-11

Inserting the Card in the Router

Follow this procedure to install the WAN interface card in the router:

Step 1 On the Cisco 1720 router, turn the power switch to the STANDBY position, and

disconnect the power cable from the power socket on the rear panel.

OnaCisco 1600 series router,turn OFFpowerto the router. However, to channel

ESD voltages to ground, do not unplug the power cable.

Step 2 Remove all network interface cables, including telephone cables, from the rear

panel.

Step 3 Use either a number 2 Phillips screwdriver or a small ﬂat-blade screwdriver to

remove the ﬁller panel from the WAN interface card slot. (See

Figure 2-7.) Save the ﬁller panel for future use.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 81 82

Pas de commentaire

Cisco 1605R Guide d'installation Page 45