Cisco 10008 Guide d'installation télécharger pdf (Page 8)

3 Installing the Router

The Cisco 10008 router can be rack-mounted in a 19-inch rack with either a flush-mount or center-mount configuration, or in

a 23-inch rack in a center-mount configuration. Use the rack-mounting kit provided with your system.

If you choose to install the Cisco 10008 router on a workbench or tabletop:

Step 1 Ensure that you have a minimum of 3 inches (7.62 cm) of clearance at the inlet and exhaust vents (at both the front

and top/rear sides of the chassis) and a minimum of 19 inches (48.3 cm) of clearance at the front and rear of the chassis

for cables and maintenance.

Step 2 Follow the lifting instructions provided for lifting the chassis in the “Lifting the Chassis” section on page 9.

Step 3 Attach the cable-management bracket. See Figure 8 on page 16.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 47 48

Pas de commentaire

Cisco 10008 Guide d'installation Page 8