
DPA 7610 Known Problems and Errata
6
Cisco DPA 7610 Voice Mail Gateway Version 1.1(1) Release Notes
78-12814-01
CSCds40475 Transfers from a Cisco IP
Phone to a PBX phone via the
DPA 7610 are routed directly
to voice mail.
The DPA 7610 functions properly in a Hybrid
configuration only if the Cisco CallManager has a
route plan that allows the Octel Voice Mail System
to make calls to a PBX system via the
Cisco CallManager.
For example:
• PBX directory numbers are 5XXX
• Cisco CallManager route plan is 8.XXXXX
In this case, you must create a route plan for the
Cisco CallManager that accepts the PBX pattern of
5XXX and allows the DPA 7610 to route the calls
over the digital link.
CSCds59539 You cannot manually add a
static route to the DPA 7610.
The DPA 7610 can receive Internet Control
Message Protocol (ICMP) redirects from the
gateway and update its routing tables accordingly.
CSCds73942 When resetting a DPA port
from Cisco Call Manager, the
port status screen on the
DPA 7610 does not always
show the port being reset.
The port status screen is refreshed periodically.
Sometimes, the port completes the reset cycle and
comes back up in between the screen refresh.
CSCds76719 If the event log levels on the
DPA 7610 are set to “trace”
for all ports, then
functionality is impaired.
You should only enable trace if instructed to do so
by a Cisco technical representative.
CSCds91358 On an Octel 250/350, the
DPA 7610 may cause the
“loopback test” from the port
test menu to fail, giving as the
reason “NO AV A RESP.”
This does not indicate an error with the Octel
system. Regular port testing should be disabled on
ports connected to a DPA 7610 to avoid generating
errors on the Octel.
Table 1 DPA 7610 Known Problems (continued)
Bug ID Summary Explanation
Commentaires sur ces manuels