Cisco NAS200 Guide de l'utilisateur télécharger pdf (Page 10)

Chapter 2

Configuration Using the Setup Wizard

Network Storage System with 2 Bays

Select the appropriate configuration for your drive 5.

usage:

NOTE: If you change the drive configuration

setting (for example, from Separate Disks to

RAID 1), both drives will be reformatted and all

current data will be erased. Back up any pre-

existing data before reconguring your drives.

Maximum Storage - Separate Disks – Drives seen

separately.

Maximum Storage - Multiple Disks –

(JBOD/LVM) Drives seen as a single virtual drive.

Maximum Security - Mirroring (RAID 1) – Requires

two hard drives.

Maximum Speed - Striping (RAID 0) – Requires

two hard drives.

Click Next.

Select Drive Configuration

Review the new settings. If they are correct, click 6. Save.

If you would like to change them, click Back to return

to the previous screen.

Confirm New Settings

To confirm that you want to format your drives and 7.

erase all data on them, click Next.

WARNING: Before you format drive(s), back

up pre-existing data because all data on

your drive(s) will be erased when they are

formatted.

If the drives have been previously formatted by the

Network Storage System, click Skip to continue

without reformatting.

Confirm Formatting

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 55 56

Pas de commentaire

Cisco NAS200 Guide de l'utilisateur Page 10