Cisco Prisma II Hybrid Amplifier Informations techniques télécharger pdf (Page 95)

Install the Module in a XD Chassis

1. Locate the fiber tray at the bottom of the chassis and the application

module slots inside the chassis as shown in the following illustration

2. Align the ridges on the top and bottom of the module with the module

guide slots located on the chassis.

3. Gently slide the module into the chassis until its power and

communications connections join connectors on the midplane bus. Do

not force the module into the chassis. If properly aligned, it should slide in

with minimal force.

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 123 124

Pas de commentaire

Cisco Prisma II Hybrid Amplifier Informations techniques Page 95