Cisco Prisma II Hybrid Amplifier Informations techniques télécharger pdf (Page 22)

Step 1: Install Chassis in a Rack

(Just in case you have never installed a piece of equipment in a rack) 

1. Use a torque wrench to tighten the bracket mounting screws to 12 to 14

in-lbs

2. Position the chassis in the rack with the fan assembly installed, but

otherwise empty.

3. Insert a mounting screw through each of the four mounting holes on

chassis front panel, and then into the rack.

4. Use a medium-sized Phillips-head screwdriver to tighten each mounting

screw until it is tight.

5. Install additional cable and fiber management hardware as needed and in

accordance with local practice.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 123 124

Pas de commentaire

Cisco Prisma II Hybrid Amplifier Informations techniques Page 22