Cisco WRT54GR Guide de l'utilisateur télécharger pdf (Page 12)

Chapter 3: Getting to Know the Wireless-G Broadband Router with RangeBooster

The Back Panel

Wireless-G Broadband Router with RangeBooster

Chapter 3: Getting to Know the Wireless-G Broadband

Router with RangeBooster

The Back Panel

The Router's ports, where the cables are connected, are located on the back panel.

Reset Button There are two ways to reset the Router's factory defaults. Either press the Reset Button,

for approximately five seconds, or restore the defaults from the Administration tab -

Factory Defaults in the Router's Web-based Utility.

Internet The Internet port is where you will connect your broadband Internet connection.

Ethernet 1, 2, 3, 4 These ports (1, 2, 3, 4) connect the Router to your networked PCs and other Ethernet

network devices.

Power The Power port is where you will connect the power adapter.

IMPORTANT: Resetting the Router will erase all

of your settings (Internet connection, wireless

security, and other settings) and replace them

with the factory defaults. Do not reset the Router

if you want to retain these settings.

Figure 3-1: The Router’s Back Panel

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 79 80

Pas de commentaire

Cisco WRT54GR Guide de l'utilisateur Page 12