Cisco WGA54G Guide de l'utilisateur télécharger pdf (Page 22)

Chapter 5: Setting up the Wireless-G Game Adapter for PlayStation®2 or GameCube™

Advanced Setup Wizard Configuration for Head-to-Head Play

Wireless-G Game Adapter

5. The Network Settings screen will appear. Enter an IP Address, IP Mask (also known as Subnet Mask), and

Gateway appropriate for your network setup. You must specify the IP Address on this screen. If you are unsure

about the IP Mask and Gateway, do not change these fields. Click the Next button

IP Address - This IP Address must be unique to your network.

IP Mask - The Game Adapter’s IP Mask must be the same as your wired network’s IP or Subnet Mask.

Gateway - Enter the IP address of your network’s Gateway here.

6. On the Confirmation screen, verify that the Game Adapter’s settings are correct. Then click the Yes button to

save these settings.

Figure 5-15: Setup Wizard’s Network Settings

ip address: the address used to identify a computer or

device on a network

gateway: a device that interconnects networks with

different, incompatible communications protocols.

subnet mask: an address code that determines the size of

the network.

Figure 5-16: ScreenSetup Wizard’s Confirmation Screen

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 59 60

Pas de commentaire

Cisco WGA54G Guide de l'utilisateur Page 22