Cisco 880 Series Guide d'installation télécharger pdf (Page 63)

3-7

Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide

OL-16193-07

Chapter 3 Connecting the Router

Connecting a Terminal or PC to the Console Port

Connect a terminal or PC to the Console Auxiliary (Aux) port either to configure the software by using

the CLI or to troubleshoot problems with the router.

To connect a terminal or PC to the console port on the router and access the CLI, follow these steps:

Step 1

Connect the RJ-45 end of a DB-9–to–RJ-45 serial cable to the RJ-45 Console Aux port on the router.

Figure 3-5 shows the RJ-45 end of the serial cable connected to the Console Aux port on the router.

Figure 3-5 Connecting a Terminal or PC to the Console Port

Step 2

Connect the DB-9 end of the DB-9–to–RJ-45 serial cable to the to the COM port on your laptop or PC.

Note

Some laptops and PCs do not come with DB-9 serial port connectors and may require a

USB-to-serial port adapter.

Step 3

To communicate with the router, start a terminal emulator application.

1 RJ-45 connector to the Console Aux port on

the router

2 DB-9 connector

231990

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 111 112

Pas de commentaire

Cisco 880 Series Guide d'installation Page 63