Cisco CCNA NETWORK SIMULATOR Manuel d'utilisateur télécharger pdf (Page 36)

31 Boson NetSim User Manual

5. Right-click the new section you just created, and click Add New Lab.

6. Type a name in the Name eld under Lab, and add a description if desired.

7. Click the Add File

button to add les to the lab; supported le extensions are *.top (topology;

required le), *.xps (instructions; required le), and *.nwc (device conguration; optional les).

First add the *.top le, then add the *.xps le. The *.nwc les are optional and can be added next

if desired; after adding *.nwc les, select the le type from the File Type drop-down list box.

Note: A topology le and instruction le are required. Only one document le, one loading

conguration le, and one grading conguration le can be added to a single lab.

8. Continue adding les until your lab is complete.

9. Click Save to save the lab.

1 2 ... 31 32 33 34 35 36 37 38 39 40

Pas de commentaire

Cisco CCNA NETWORK SIMULATOR Manuel d'utilisateur Page 36