Cisco 3130 Spécifications télécharger pdf (Page 63)

2-33

Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference

OL-13271-06

Chapter 2 Cisco Catalyst Blade Switch 3130 for Dell Cisco IOS Commands

authentication host-mode

This example shows how to enable single-host mode on a port:

Switch(config-if)# authentication host-mode single-host

You can verify your settings by entering the show authentication privileged EXEC command.

Related Commands Command Description

authentication

control-direction

Configures the port mode as unidirectional or bidirectional.

authentication event Sets the action for specific authentication events.

authentication

fallback

Configures a port to use web authentication as a fallback method for clients

that do not support IEEE 802.1x authentication

authentication open Enables or disable open access on a port.

authentication order Sets the order of authentication methods used on a port.

authentication

periodic

Enables or disable reauthentication on a port.

authentication

port-control

Enables manual control of the port authorization state.

authentication

priority

Adds an authentication method to the port-priority list.

authentication timer Configures the timeout and reauthentication parameters for an

802.1x-enabled port.

authentication

violation

Configures the violation modes that occur when a new device connects to a

port or when a new device connects to a port after the maximum number of

devices are connected to that port.

show authentication Displays information about authentication manager events on the switch.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 106 107

Pas de commentaire

Cisco 3130 Spécifications Page 63