Cisco Aironet 1040 Series Manuel d'utilisateur télécharger pdf (Page 4)

Release Notes for Cisco Aironet Access Points and Bridges for Cisco IOS Release 15.2(2)JA

OL-23990-01

System Requirements

Figure 1 Network Interfaces: Radio Settings Page

Step 2

Select Disable to disable the radio.

Step 3 Click Apply at the bottom of the page.

Step 4 If your access point has two radios, repeat these steps for the second radio.

Beginning in privileged EXEC mode, follow these steps to disable the access point radios using the

access point CLI:

If your access point has two radios, repeat these steps for the second radio. Use the no form of the

shutdown command to enable the radio.

Command Purpose

Step 1

configure terminal Enter global configuration mode.

Step 2

interface dot11radio {0 | 1} Enter interface configuration mode for the radio interface. The

2.4-GHz radio is radio 0, and the 5-GHz radio is radio 1.

Step 3

shutdown Disable the radio port.

Step 4

end Return to privileged EXEC mode.

Step 5

copy running-config startup-config (Optional) Save your entries in the configuration file.

1 2 3 4 5 6 7 8 9 ... 15 16

Pas de commentaire

Cisco Aironet 1040 Series Manuel d'utilisateur Page 4